248 lines
11 KiB
C
248 lines
11 KiB
C
#ifndef HW_LIB_ST7735_H
|
|
#define HW_LIB_ST7735_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define WHITE 0xFFFF
|
|
#define BLACK 0x0000
|
|
#define BLUE 0x001F
|
|
#define BRED 0XF81F
|
|
#define GRED 0XFFE0
|
|
#define GBLUE 0X07FF
|
|
#define RED 0xF800
|
|
#define MAGENTA 0xF81F
|
|
#define GREEN 0x07E0
|
|
#define CYAN 0x7FFF
|
|
#define YELLOW 0xFFE0
|
|
#define BROWN 0XBC40 //棕色
|
|
#define BRRED 0XFC07 //棕红色
|
|
#define GRAY 0X8430 //灰色
|
|
#define DARKBLUE 0X01CF //深蓝色
|
|
#define LIGHTBLUE 0X7D7C //浅蓝色
|
|
#define GRAYBLUE 0X5458 //灰蓝色
|
|
|
|
|
|
/**
|
|
* @brief ST7735 Registers
|
|
*/
|
|
#define ST7735_NOP 0x00U /* No Operation: NOP */
|
|
#define ST7735_SW_RESET 0x01U /* Software reset: SWRESET */
|
|
#define ST7735_READ_ID 0x04U /* Read Display ID: RDDID */
|
|
#define ST7735_READ_STATUS 0x09U /* Read Display Statu: RDDST */
|
|
#define ST7735_READ_POWER_MODE 0x0AU /* Read Display Power: RDDPM */
|
|
#define ST7735_READ_MADCTL 0x0BU /* Read Display: RDDMADCTL */
|
|
#define ST7735_READ_PIXEL_FORMAT 0x0CU /* Read Display Pixel: RDDCOLMOD */
|
|
#define ST7735_READ_IMAGE_MODE 0x0DU /* Read Display Image: RDDIM */
|
|
#define ST7735_READ_SIGNAL_MODE 0x0EU /* Read Display Signal: RDDSM */
|
|
#define ST7735_SLEEP_IN 0x10U /* Sleep in & booster off: SLPIN */
|
|
#define ST7735_SLEEP_OUT 0x11U /* Sleep out & booster on: SLPOUT */
|
|
#define ST7735_PARTIAL_DISPLAY_ON 0x12U /* Partial mode on: PTLON */
|
|
#define ST7735_NORMAL_DISPLAY_OFF 0x13U /* Partial off (Normal): NORON */
|
|
#define ST7735_DISPLAY_INVERSION_OFF 0x20U /* Display inversion off: INVOFF */
|
|
#define ST7735_DISPLAY_INVERSION_ON 0x21U /* Display inversion on: INVON */
|
|
#define ST7735_GAMMA_SET 0x26U /* Gamma curve select: GAMSET */
|
|
#define ST7735_DISPLAY_OFF 0x28U /* Display off: DISPOFF */
|
|
#define ST7735_DISPLAY_ON 0x29U /* Display on: DISPON */
|
|
#define ST7735_CASET 0x2AU /* Column address set: CASET */
|
|
#define ST7735_RASET 0x2BU /* Row address set: RASET */
|
|
#define ST7735_WRITE_RAM 0x2CU /* Memory write: RAMWR */
|
|
#define ST7735_RGBSET 0x2DU /* LUT for 4k,65k,262k color: RGBSET */
|
|
#define ST7735_READ_RAM 0x2EU /* Memory read: RAMRD */
|
|
#define ST7735_PTLAR 0x30U /* Partial start/end address set: PTLAR */
|
|
#define ST7735_TE_LINE_OFF 0x34U /* Tearing effect line off: TEOFF */
|
|
#define ST7735_TE_LINE_ON 0x35U /* Tearing effect mode set & on: TEON */
|
|
#define ST7735_MADCTL 0x36U /* Memory data access control: MADCTL */
|
|
#define ST7735_IDLE_MODE_OFF 0x38U /* Idle mode off: IDMOFF */
|
|
#define ST7735_IDLE_MODE_ON 0x39U /* Idle mode on: IDMON */
|
|
#define ST7735_COLOR_MODE 0x3AU /* Interface pixel format: COLMOD */
|
|
#define ST7735_FRAME_RATE_CTRL1 0xB1U /* In normal mode (Full colors): FRMCTR1 */
|
|
#define ST7735_FRAME_RATE_CTRL2 0xB2U /* In Idle mode (8-colors): FRMCTR2 */
|
|
#define ST7735_FRAME_RATE_CTRL3 0xB3U /* In partial mode + Full colors: FRMCTR3 */
|
|
#define ST7735_FRAME_INVERSION_CTRL 0xB4U /* Display inversion control: INVCTR */
|
|
#define ST7735_DISPLAY_SETTING 0xB6U /* Display function setting */
|
|
#define ST7735_PWR_CTRL1 0xC0U /* Power control setting: PWCTR1 */
|
|
#define ST7735_PWR_CTRL2 0xC1U /* Power control setting: PWCTR2 */
|
|
#define ST7735_PWR_CTRL3 0xC2U /* In normal mode (Full colors): PWCTR3 */
|
|
#define ST7735_PWR_CTRL4 0xC3U /* In Idle mode (8-colors): PWCTR4 */
|
|
#define ST7735_PWR_CTRL5 0xC4U /* In partial mode + Full colors: PWCTR5 */
|
|
#define ST7735_VCOMH_VCOML_CTRL1 0xC5U /* VCOM control 1: VMCTR1 */
|
|
#define ST7735_VMOF_CTRL 0xC7U /* Set VCOM offset control: VMOFCTR */
|
|
#define ST7735_WRID2 0xD1U /* Set LCM version code: WRID2 */
|
|
#define ST7735_WRID3 0xD2U /* Customer Project code: WRID3 */
|
|
#define ST7735_NV_CTRL1 0xD9U /* NVM control status: NVCTR1 */
|
|
#define ST7735_READ_ID1 0xDAU /* Read ID1: RDID1 */
|
|
#define ST7735_READ_ID2 0xDBU /* Read ID2: RDID2 */
|
|
#define ST7735_READ_ID3 0xDCU /* Read ID3: RDID3 */
|
|
#define ST7735_NV_CTRL2 0xDEU /* NVM Read Command: NVCTR2 */
|
|
#define ST7735_NV_CTRL3 0xDFU /* NVM Write Command: NVCTR3 */
|
|
#define ST7735_PV_GAMMA_CTRL 0xE0U /* Set Gamma adjustment (+ polarity): GAMCTRP1 */
|
|
#define ST7735_NV_GAMMA_CTRL 0xE1U /* Set Gamma adjustment (- polarity): GAMCTRN1 */
|
|
#define ST7735_EXT_CTRL 0xF0U /* Extension command control */
|
|
#define ST7735_PWR_CTRL6 0xFCU /* In partial mode + Idle mode: PWCTR6 */
|
|
#define ST7735_VCOM4_LEVEL 0xFFU /* VCOM 4 level control */
|
|
|
|
/**
|
|
* @brief ST7735 ID
|
|
*/
|
|
#define ST7735_ID 0x5CU
|
|
|
|
/**
|
|
* @brief ST7735 1.8 inch Size
|
|
*/
|
|
#define ST7735_1_8_WIDTH 128U
|
|
#define ST7735_1_8_HEIGHT 160U
|
|
/**
|
|
* @brief ST7735 0.9 inch Size
|
|
*/
|
|
#define ST7735_0_9_WIDTH 80U
|
|
#define ST7735_0_9_HEIGHT 160U
|
|
/**
|
|
* @brief LCD_OrientationTypeDef
|
|
* Possible values of Display Orientation
|
|
*/
|
|
#define ST7735_ORIENTATION_PORTRAIT 0x00U /* Portrait orientation choice of LCD screen */
|
|
#define ST7735_ORIENTATION_PORTRAIT_ROT180 0x01U /* Portrait rotated 180° orientation choice of LCD screen */
|
|
#define ST7735_ORIENTATION_LANDSCAPE 0x02U /* Landscape orientation choice of LCD screen */
|
|
#define ST7735_ORIENTATION_LANDSCAPE_ROT180 0x03U /* Landscape rotated 180° orientation choice of LCD screen */
|
|
|
|
/**
|
|
* @brief Possible values of pixel data format (ie color coding)
|
|
*/
|
|
#define ST7735_FORMAT_RBG444 0x03U /* Pixel format chosen is RGB444 : 12 bpp */
|
|
#define ST7735_FORMAT_RBG565 0x05U /* Pixel format chosen is RGB565 : 16 bpp */
|
|
#define ST7735_FORMAT_RBG666 0x06U /* Pixel format chosen is RGB666 : 18 bpp */
|
|
#define ST7735_FORMAT_DEFAULT ST7735_FORMAT_RBG565
|
|
|
|
/**
|
|
* @brief LCD_Type_Define
|
|
*/
|
|
#define ST7735_1_8_inch_screen 0x00U
|
|
#define ST7735_0_9_inch_screen 0x01U
|
|
#define ST7735_1_8a_inch_screen 0x02U
|
|
/**
|
|
* @brief LCD_Panel
|
|
*/
|
|
#define HannStar_Panel 0x00U
|
|
#define BOE_Panel 0x01U
|
|
|
|
/**
|
|
* @brief LCD RGB or BGR
|
|
*/
|
|
#define LCD_RGB 0x00U
|
|
#define LCD_BGR 0x08U
|
|
|
|
|
|
#define TFT_DELAY 120
|
|
#define TFT_PANEL HannStar_Panel
|
|
#define TFT_TYPE ST7735_0_9_inch_screen
|
|
|
|
|
|
#if TFT_TYPE == ST7735_0_9_inch_screen //0.96 ST7735
|
|
#if TFT_PANEL == HannStar_Panel
|
|
#define TFT_X_OFFSET 26
|
|
#define TFT_Y_OFFSET 1
|
|
#else //BOE Panel
|
|
#define TFT_X_OFFSET 24
|
|
#define TFT_Y_OFFSET 0
|
|
#endif
|
|
#endif
|
|
|
|
#if TFT_TYPE == ST7735_1_8a_inch_screen
|
|
#if TFT_PANEL == BOE_Panel
|
|
#define TFT_X_OFFSET 2
|
|
#define TFT_Y_OFFSET 1
|
|
#endif
|
|
#endif
|
|
|
|
#define TFT_XPOS_CMD ST7735_CASET
|
|
#define TFT_YPOS_CMD ST7735_RASET
|
|
#define TFT_DIR_CMD ST7735_MADCTL
|
|
#define TFT_WRITE_RAM ST7735_WRITE_RAM
|
|
#define TFT_READ_RAM ST7735_READ_RAM
|
|
|
|
#if TFT_PANEL == HannStar_Panel
|
|
#define DIR_MASK(dir) (uint8_t)OrientationTab[dir][1] | LCD_BGR;
|
|
#else
|
|
#define DIR_MASK(dir) (uint8_t)OrientationTab[dir][1] | LCD_RGB;
|
|
#endif
|
|
|
|
const uint8_t st7735initcmd[] = {
|
|
0x81, ST7735_SW_RESET,
|
|
0x81, ST7735_SW_RESET,
|
|
2, ST7735_SLEEP_OUT, 0x00,
|
|
4, ST7735_FRAME_RATE_CTRL1, 0x01, 0x2C, 0x2D,
|
|
4, ST7735_FRAME_RATE_CTRL2, 0x01, 0x2C, 0X2D,
|
|
7, ST7735_FRAME_RATE_CTRL3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
|
|
2, ST7735_FRAME_INVERSION_CTRL, 0x07,
|
|
4, ST7735_PWR_CTRL1, 0xA2, 0x02, 0x84,
|
|
2, ST7735_PWR_CTRL2, 0xC5,
|
|
3, ST7735_PWR_CTRL3, 0x0A, 0X00,
|
|
3, ST7735_PWR_CTRL4, 0x8A, 0x2A,
|
|
3, ST7735_PWR_CTRL5, 0x8A, 0xEE,
|
|
2, ST7735_VCOMH_VCOML_CTRL1, 0x0E,
|
|
1, ST7735_DISPLAY_INVERSION_ON,//HannStar_Panel
|
|
// 1,ST7735_DISPLAY_INVERSION_OFF,//BOE_Panel
|
|
2, ST7735_COLOR_MODE, ST7735_FORMAT_RBG565,
|
|
17, ST7735_PV_GAMMA_CTRL, 0x02, 0x1C, 0x07U, 0x12U, 0x37U, 0x32U, 0x29U, 0x2DU, 0x29U, 0x25U, 0x2BU, 0x39U,
|
|
0x00U, 0x01U, 0x03U, 0x10U,
|
|
17, ST7735_NV_GAMMA_CTRL, 0x03, 0x1DU, 0x07U, 0x06U, 0x2EU, 0x2CU, 0x29U, 0x2DU, 0x2EU, 0x2EU, 0x37U, 0x3FU,
|
|
0x00U, 0x00U, 0x02U, 0x10U,
|
|
2, ST7735_DISPLAY_OFF, 0x00,
|
|
2, ST7735_DISPLAY_ON, 0x00
|
|
};
|
|
const uint32_t OrientationTab[4][2] =
|
|
{
|
|
{0x40U, 0xC0U}, /* 液晶屏纵向选择 */
|
|
{0x80U, 0x00U}, /* 液晶屏纵向旋转 180° 方向选择 */
|
|
{0x20U, 0x60U}, /* 液晶屏横向选择 */
|
|
{0xE0U, 0xA0U}, /* 液晶屏横向旋转 180° 方向选择 */
|
|
};
|
|
|
|
#define ST7735_ReadID(dev, Id) do{\
|
|
uint8_t tmp[3] = {ST7735_READ_ID1, ST7735_READ_ID2, ST7735_READ_ID3};\
|
|
dev->cmd(&tmp[0],1);\
|
|
dev->read( &tmp[0], 1);\
|
|
dev->cmd(&tmp[1],1);\
|
|
dev->read( &tmp[1], 1);\
|
|
dev->cmd(&tmp[2],1);\
|
|
dev->read( &tmp[2], 1);\
|
|
Id = ((uint32_t) tmp[2]) << 0 | ((uint32_t) tmp[1]) << 8 | ((uint32_t) tmp[0]) << 16;\
|
|
}while(0)
|
|
|
|
|
|
#if TFT_TYPE == ST7735_0_9_inch_screen
|
|
#define ST7735_SetDir(dev, dir) do{\
|
|
if((dir == ST7735_ORIENTATION_PORTRAIT) || (dir == ST7735_ORIENTATION_PORTRAIT_ROT180))\
|
|
{\
|
|
dev->width = ST7735_0_9_WIDTH;\
|
|
dev->height = ST7735_0_9_HEIGHT;\
|
|
}\
|
|
else\
|
|
{\
|
|
dev->width = ST7735_0_9_HEIGHT;\
|
|
dev->height = ST7735_0_9_WIDTH;\
|
|
}\
|
|
}while(0);
|
|
#endif
|
|
#if TFT_TYPE == ST7735_1_8_inch_screen || TFT_TYPE == ST7735_1_8a_inch_screen
|
|
inline void ST7735_SetDir(TFT_T *dev,TFT_DIR_T dir){
|
|
if((dir == ST7735_ORIENTATION_PORTRAIT) || (dir == ST7735_ORIENTATION_PORTRAIT_ROT180))
|
|
{
|
|
dev->width = ST7735_1_8_WIDTH;
|
|
dev->height = ST7735_1_8_HEIGHT;
|
|
}
|
|
else
|
|
{
|
|
dev->width = ST7735_1_8_HEIGHT;
|
|
dev->height = ST7735_1_8_WIDTH;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif //HW_LIB_ST7735_H
|